What is the difference between deck sealing and deck oiling?

Deck sealing uses a film-forming product that creates a protective barrier on top of the timber surface, while deck oiling uses a penetrating oil that soaks into the timber grain. Sealers tend to last longer but can peel or crack over time, requiring more prep work to recoat. Oils are easier to maintain and allow the natural timber grain to show through. Sydney Deck recommends the best product for your specific timber species and usage.

How often should a deck be sealed in Sydney?

In Sydney's climate, timber decks typically need to be re-sealed every 2 to 3 years depending on sun exposure, foot traffic, and the type of sealer used. Decks with heavy UV exposure or close to the coast may need sealing more frequently. Doing the water bead test is the easiest way to know when it is time to reseal your deck.

How much does deck sealing cost in Sydney?

Deck sealing in Sydney costs between $20 and $45 per square metre depending on the size of the deck, its current condition, and the number of coats required. A standard 40 sqm deck seal costs approximately $800 to $1,800. Sydney Deck provides free on-site quotes with no hidden charges.

Does a deck need to be sanded before sealing?

Yes, if the old sealer or stain is peeling or worn, the deck should be sanded back to bare timber before applying a new sealer. If the existing sealer is still in good condition, a light clean and a fresh coat may be sufficient. Sydney Deck inspects every deck before recommending the right preparation and sealing process.

Can Sydney Deck seal my deck the same day as sanding?

In most cases, yes. Sydney Deck can sand and seal your deck in one visit for smaller jobs where the sanding is complete early in the day. For larger decks or in humid conditions, the first seal coat is applied the same day and the second coat the following day. We always ensure the timber is clean and dry before applying any sealer.

What is composite decking and how is it different from timber?

Composite decking is made from a blend of recycled wood fibres and plastic polymers, creating a durable, low-maintenance alternative to traditional timber decking. Unlike natural timber, composite decking does not need to be oiled, stained, or sanded. It is resistant to moisture, UV fading, and insects, making it a great long-term option for Sydney's climate.

How much does composite decking cost in Sydney?

Composite decking in Sydney typically costs between $250 and $500 per square metre installed, depending on the brand, profile, and subframe requirements. While the upfront cost is higher than treated pine, composite decking saves money over time due to minimal maintenance requirements. Sydney Deck provides free quotes for composite deck installations.

Does composite decking get hot in the Sydney sun?

Some composite decking can get warm in direct sunlight, especially darker-coloured boards. However, premium composite brands now use capped composite technology with heat-dispersing properties that keep surface temperatures much lower than older composite or dark timber products. Sydney Deck recommends lighter-coloured boards for north-facing or full-sun decks.

How long does composite decking last?

Quality composite decking can last 25 to 30 years with minimal maintenance. Most premium brands come with a 25-year warranty against fading, staining, and structural deterioration. This makes composite decking one of the most cost-effective long-term decking solutions available in Sydney.

Can Sydney Deck install composite decking?

Yes, Sydney Deck installs a range of composite decking products across Greater Sydney. We help homeowners choose the right composite brand, colour, and profile for their outdoor space, and handle the full installation from subframe to finished deck. Contact Sydney Deck for a free measure and quote.

How much does it cost to build a deck in Sydney?

Building a new timber deck in Sydney typically costs between $300 and $800 per square metre depending on the deck design, materials, height, and site access. A standard ground-level 30 sqm deck costs approximately $9,000 to $15,000 fully installed. Sydney Deck provides free detailed quotes for all new deck builds.

Do I need council approval to build a deck in Sydney?

In most cases, small decks under 1 metre in height and under a certain square metre threshold can be built under a Complying Development Certificate (CDC) without full council approval. Larger or elevated decks may require a Development Application (DA). Sydney Deck can advise on permit requirements for your specific property.

What types of timber are best for building a deck in Sydney?

The best timber species for decks in Sydney include Spotted Gum, Merbau, Blackbutt, and Ironbark due to their hardness, durability, and natural resistance to insects and decay. Treated pine is a more budget-friendly option for lower-traffic areas. Sydney Deck helps clients choose the best timber for their climate, budget, and aesthetic preferences.

How long does it take to build a deck in Sydney?

Most standard timber deck builds in Sydney take between 3 and 7 days depending on size, complexity, and site conditions. Larger multi-level or elevated decks may take 1 to 2 weeks. Sydney Deck will give you a clear timeline before work begins so you can plan accordingly.

Is Sydney Deck licensed to build decks in NSW?

Yes, Sydney Deck is a fully licensed and insured decking contractor operating throughout Greater Sydney, NSW. All work complies with Australian Standards and local building codes. Sydney Deck carries full public liability insurance and all builds come with a workmanship guarantee.

What is deck restoration and what does it include?

Deck restoration is a full renewal process for weathered, damaged, or aged timber decks. It typically includes pressure washing, sanding back old stains and finishes, repairing damaged boards, re-nailing or screwing loose decking, and applying fresh oil or sealant. Sydney Deck provides complete end-to-end restoration that makes your deck look brand new.

How much does deck restoration cost in Sydney?

Deck restoration in Sydney costs between $35 and $70 per square metre depending on the deck size, condition, and timber type. A standard 40 sqm deck restoration typically costs $1,400 to $2,800 fully completed. Sydney Deck provides free on-site quotes with no obligation.

How long does a deck restoration last in Sydney?

A professionally restored timber deck in Sydney can last 2 to 5 years before needing another full restoration, depending on sun exposure, foot traffic, and maintenance. Regular cleaning and re-oiling every 12 to 18 months significantly extends the life of your deck restoration.

Can all timber decks be restored or do some need replacing?

Most timber decks can be restored unless more than 30% of the structural boards are rotten or structurally compromised. Sydney Deck performs a full inspection before quoting to determine if restoration or replacement is the better long-term investment. Minor to moderate weathering, cracking, and graying are all restorable conditions.

How long does deck restoration take?

A standard deck restoration in Sydney takes 2 to 3 days. Day one involves cleaning and sanding, day two involves repairs and the first coat of oil, and day three involves the final coat and touch-ups. Drying time between coats may extend the timeline slightly in cooler or humid weather.

How long does deck sanding take in Sydney?

Most timber deck sanding jobs in Sydney take 1 to 2 days depending on the deck size and condition. A standard 3050 sqm deck typically takes one full day. Larger or heavily weathered decks may require an extra day for proper preparation before oiling.

Do I need to sand my deck before oiling?

Yes, sanding before oiling is essential. Sanding removes the old finish, opens the timber grain, and allows the oil to penetrate deeply for maximum protection. Applying oil over an unsanded or dirty surface results in poor adhesion and a patchy finish that won't last.

How many coats of oil does a timber deck need?

Most timber decks in Sydney need 2 coats of oil. The first coat is absorbed deeply into the grain, and the second coat seals and protects the surface. Highly porous or dry timber may absorb a third coat. Sydney Deck uses premium penetrating oils suited to Australian hardwoods.

What is the best oil for a timber deck in Sydney?

The best oil for a timber deck in Sydney is a UV-resistant penetrating deck oil designed for Australian hardwoods like Merbau, Spotted Gum, or Ironbark. Products like Intergrain UltraDeck, Feast Watson, and Cutek CD50 are commonly recommended. Sydney Deck uses premium oils that provide long-lasting protection against Sydney's harsh UV and coastal conditions.

How much does deck sanding and oiling cost in Sydney?

Deck sanding and oiling in Sydney typically costs between $30 and $60 per square metre depending on the deck condition, timber type, and accessibility. A standard 40 sqm deck costs approximately $1,200 to $2,400 fully completed. Sydney Deck offers free on-site quotes with no hidden charges.

How much does deck repair cost in Sydney?

Deck repair costs in Sydney range from $200 for minor fixes like loose boards or popped nails, up to $900 or more for larger structural repairs or board replacements on bigger decks. Sydney Deck provides free quotes so you know exactly what to expect before work begins.

Can a damaged deck be repaired or does it need to be replaced?

In most cases a damaged deck can be repaired rather than replaced, saving you thousands of dollars. Cracked boards, loose joists, rotted sections, wobbly railings and structural damage can all typically be repaired by Sydney Deck specialists. A full replacement is only recommended when the damage is widespread and the timber is beyond saving.

How long does deck repair take?

Most deck repairs in Sydney are completed within a single day. Minor repairs such as replacing a few boards or fixing railings take just a few hours. More extensive structural repairs may take one to two days. Sydney Deck always gives you a clear timeline before starting.

What types of deck damage can Sydney Deck repair?

Sydney Deck repairs cracked or split boards, rotted timber sections, loose or wobbly railings, structural joist damage, popped nails and screws, water-damaged deck areas, and boards that are warped or cupped from UV exposure. We work on all timber species including Merbau, Spotted Gum, Blackbutt and Treated Pine.

Is deck repair covered by home insurance in Australia?

Deck damage caused by sudden events such as storms, fallen trees or accidental damage may be covered by your home and contents insurance in Australia. However, general wear and tear or gradual deterioration is typically not covered. We recommend checking with your insurer before booking. Sydney Deck can provide a detailed repair quote and report to support your insurance claim if required.

How much does deck restoration cost in Sydney?

Deck restoration in Sydney typically costs between $600 and $3,500 depending on the deck size, timber condition, and services required. A basic sand and oil on a small deck starts from around $600, while a full restoration on a large deck can reach $3,500+. Sydney Deck provides free, no-obligation quotes for all restoration work.

How long does deck restoration take in Sydney?

Most standard deck restorations take 1 to 3 days. A simple sand and oil on a small-to-medium deck can be completed in a single day. Larger decks or those requiring structural repairs may take 2 to 3 days. Sydney Deck provides a clear timeline before starting any job.

What suburbs in Sydney do you service?

Sydney Deck services all suburbs across Greater Sydney including the North Shore, Northern Beaches, Eastern Suburbs, Inner West, Western Sydney, South Sydney, Sutherland Shire, Hills District and the CBD. Key areas include Bondi Beach, Manly, Mosman, Parramatta, Chatswood, Newtown, Balmain and many more.

What types of timber decks do you restore?

Sydney Deck restores all types of Australian timber decks including Merbau, Spotted Gum, Blackbutt, Ironbark, Tallowwood, Kwila and Treated Pine. We tailor our sanding, oiling and sealing approach to the specific timber species and its condition.

Is deck restoration worth it compared to full replacement?

In most cases, yes. Deck restoration costs 3 to 5 times less than full deck replacement and can add 10 or more years of life to a structurally sound timber deck. Sydney Deck will inspect your deck and give you an honest assessment of whether restoration or replacement is the better option for your situation.

How often should I oil my timber deck in Sydney?

In Sydney's climate, most timber decks should be oiled every 12 to 18 months. Decks in full sun or near the coast may need oiling every 12 months due to UV exposure and salt air. A good test is to sprinkle water on the deck surface if it soaks in rather than beading up, it is time to re-oil.

Do you offer free quotes for deck restoration in Sydney?

Yes, Sydney Deck offers completely free, no-obligation quotes for all deck restoration, repair, sanding and oiling jobs across Sydney. Simply call us on +61404552222 or fill in the contact form and we will respond within 24 hours.